C.E. Niehoff & Co. C621 Stator Replacement Instructions User Manual
Page 4
If you have questions about your alternator or any of these instructions, or if you need to locate a Factory Authorized Service Dealer, please contact us at:
C. E. Niehoff & Co.• 2021 Lee Street • Evanston, IL 60202 USA
TEL: 800.643.4633 USA and Canada • TEL: 847.866.6030 outside USA and Canada • FAX: 847.492.1242
E-mail us at [email protected]
j. Reconnect stators with interconnect splice:
1) Slide new sleeve over end of DE or ADE lead.
2) Crimp new connector socket on the DE
stator Y lead. Crimp new connector pin on
the ADE stator Y lead. Securely mate the
connectors.
3) Apply hi-temp solder over mated connection.
4) Completely cover mated connection with
Dow
Corning
®
SE 9186L RTV coating or
equivalent—wait until coating has hardened
to ensure waterproofness.
5) Position new sleeve over sealed connection.
6) Position spliced Y leads against wall of shell
so that field coil can fit into space between
stators without damaging interconnect splice
or Y leads.
Interconnect
splice
Return to CEN 600 Series Service Manual SM6
to fi nish C621 alternator assembly
Connector
socket
Connector pin
Sleeve
Figure F–1e Interconnect Splice Assembly
Page 4 of 4
II202A