Carolina Corning Hot Plate Stirrer 120 V - Manual (Page 8)

7
Inspection Procedures
• Look for etching, scratching or chipping on top plate. If any of these
conditions are present, replace* the complete top plate and element assem-
bly immediately.
• Look for damaged power cord. If cord is damaged, replace* immediately.
Preventive Maintenance
• Disconnect power by unplugging unit before performing any mainte-
nance or service*.
• Always use a grounded power outlet.
• Keep the Pyroceram top plate clean. Unplug unit and use non-abrasive
cleaner.
• Clean spills promptly. Unplug unit and use a non-abrasive cleaner.
• Do not immerse unit for cleaning.
• Replace* a damaged top immediately using complete top plate and
element assembly.
• Always keep plug closure in socket when not using optional temperature
controller.
* Refer to page 9 for appropriate part number. Service should always be done
by qualified technicians using Corning parts and instructions.
20625_corning 9/17/03 4:15 PM Page 7