Carolina 2816K PERIMETER WORKSTATION - Manual (Page 5)

- 5 -
4. Place remaining two units with 11” cleats (pointing towards the wall) back-to-back and secure 7” x
35” filler panels between the cabinets on each side using the #10 x 1-1/2” truss head screws.
5. Apply the steel rail cleats to the wing assembly (Figure 5A) and the (2) 24.25” x 4.5” rails (Figure 5B)
with the #8 x ¾” truss head screws.
Figure 5A
Figure 5B
6. With one person holding the wing with rod storage, another person should attach it to the outside of
the cabinets using #8 x ¾” truss head screws. Support this wing until the top is secured. They are not
strong enough to withstand weight until top is attached.