Display, Switching on, Switching off – AEG SKD71800F0 User Manual
Page 7: Temperature regulation, Dynamicair function
Display
7
8
5
6
4
3
2
1
1
Timer function
2
DYNAMICAIR function
3
Minute Minder function
4
Child Lock function
5
Alarm indicator
6
Temperature indicator
7
Holiday function
8
COOLMATIC function
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power socket.
2. Press the ON/OFF button if the display is off.
3. The alarm buzzer could operate after few seconds.
To reset the alarm refer to "High temperature alarm".
4. The temperature indicators show the set default temperature.
To select a different set temperature refer to "Temperature regulation".
Switching off
To switch off the appliance do these steps:
1. Press the ON/OFF button for 5 seconds.
2. The display switches off.
3. To disconnect the appliance from the power disconnect the mains plug from the power
socket.
Temperature regulation
The set temperature of the fridge may be adjusted by pressing the temperature button.
Set default temperature:
• +5°C for the fridge
The temperature indicator shows the set temperature.
The set temperature will be reached within 24 hours.
After a power failure the set temperature remains stored.
DYNAMICAIR function
To switch on the function:
1. Press the Mode button until the corresponding icon appears.
Control panel
7