Castle AT-8 Diagnostics Manual - Manual (Page 5)

How To…
8.02
Adjusting the Fence
The fences on the work surface should be in perfect square to act as a reference during the
rews.
OLUTION STEPS:
. Make sure all the allen screws are loosened so that the fences will move with pressure, but are not
construction process. The vertical and horizontal fences are held in place with allen head sc
The screws holding the fences in the bottom left of the tables are fixed. The other allen screws are
adjustable.
S
1
completely slack.
. Place a truly square piece of wood in the corner of the table against the fences.
. Tap or move the fences with a mallet so that they match the wood guide.
. Tighten the allen screws, starting with the fixed screws first.
. Use a long piece of truly straight wood and check that the bottom two fences are aligned with one
. If they are not straight then loosen the right fence, as above, and repeat adjustment until they are
2
3
4
5
another.
6
straight.