Tsm-20 parts list – Castle TSM-20 Operator Manual Addendum User Manual
Page 7
TSM-20 PARTS LIST
Castle Part #
Part Description
E23102
Porter Cable 3102 Trimmer Motor (Drills hole) DISCONTINUED
E26902
Porter Cable 6902 Router Motor (Routs pocket; mount with F14232 bolt) (same router as TSM-21)
D50014
1/4" Collet Assembly (for E23102 motor)
Note: Brass bushing no longer available; replaced by 1/4" shank on the bit
D50031
Collet Nut
E60286
Snap-action Microswitch (Silver push button) (Drill Stop, Rout Stop, and Wood Sensor Switch)
Note: Grainger Part No. 6X286 Manufacturer Part No. Z-15GQ-B7-K
E60284
Snap-action Microswitch (with Lever) (Used in older versions)
Note: Grainger Part No. 6X284 Manufacturer Part No. Z-15GW-B7-K
E07033
Microswitch (Small, white with Lever) (Used in oldest versions)
Note: Grainger Part No. 6A884 Manufacturer Part No. TMCG40
E07041
Snap-action MicroSwitch (Small push button) (Foot Switch for TSM 20, 21 & 35)
Note: Grainger Part No. 6X283
E20120
EL-06 3-Relay Control Board (EL-06 is compatible with all models)
Note: Revision EL-05A and EL05B no longer available - Refer to Electrical Wiring diagram
DISCONTINUED
E20014
14 Pin Terminal Strip (for Relay Control Board)
P53000
Monnier Regulator
Note: Must be calibrated to 85psi by shipping dept. prior to shipping
C21004
Drive Cylinder
Note: Same as TSM-21 drive cylinder
P13013
Fabco Valve Assembly (3 valves included with Manifold)
E20126
Solenoid Valve (Clamp, Rout and Drill valves)
P00117
SMC Flow Control
Note: Same as Feed Speed valve used on TSM-21 & 35
E75762
On/Off Switch (silver metal)
P10320
SQE 10-32 Clippard
Note: small, brass;
P10001
Humphrey SQE-1
Note: larger than P10320, octagonal, nickel
P10325
10-32 x 5/32 ID Black Barb (for P10320 when used as Clamp Exhaust)
P31032
10-32 x 10-32 White Nylon Coupling (for P10320 when used as Clamp Exhaust)
E18061
Brown
SQE White Nylon Barb
18 AWG Hook Up Wire
Flow Control
On/Off Toggle Switch
SQE (Super Quick Exhaust)
SQE (Super Quick Exhaust)
Regulator
Drive Cylinder
Manifold-Fabco
Solenoid Coil - Fabco
Drill & Router Motors & Accessories
Microswitches
Control Board
14 Pin Terminal Strip