J&M GC-24T Manual User Manual
Page 34
33
WHEEL RIMS AND TIRES
# Part No.
Description
1 21x32-10HD
Wheel Rim, 10 hole, 21x32 (11.13 pilot) (13.19 bolt circle) (for 24.5x32 Tire)
1 27x32-10
Wheel Rim, 10 hole, 27x32 (11.13 pilot) (13.19 bolt circle) (for 30.5x32 Tire)
1 27x32-10HD
Wheel Rim, 10 hole, 27x32HD Heavy Duty (11.13 pilot) (13.19 bolt circle) (for 900/60R32 Tire)
1 31x32-10
Wheel Rim, 10 hole, 31x32 (3 piece) (11.13 pilot) (13.19 bolt circle) (for 35.5x32 Tire)
1 OR-3132
Rubber O-Ring Seal for 31x32-10 Wheel Rim
25x36-10
Wheel Rim, 10 hole, 25x36 (11.13 pilot) (13.19 bolt circle) (for 66x43.00 Tire)
2 245x32-R3-16
24.5x32 Diamond Tread Tire, 16 ply (used with 21x32-10HD Wheel)
2 305x32-R1
30.5x32 Lug Tread Tire, 12 ply (used with 27x32-10 Wheel)
2 305x32-R3
30.5x32 Diamond Tread Tire, 14 ply (used with 27x32-10 Wheel)
2 900/60R32
900/60R32 Lug Tread Tire, 176 Load Index Rating (used with 27x32-10HD Heavy Duty Wheel)
2 355x32-R3
35.5x32 Diamond Tread Tire, 20 ply (used with 31x32-10 Wheel)
2 66x43.00-R1
66x43.00 Lug Tread Tire, 16 ply (used with 25x36-10 Wheel)
OPTIONAL VINYL SOCK (FOR END OF FLOW CONTROL SPOUT)
# Part No.
Description
1 818-VS42
22 ounce vinyl canvas sock for end of spout (42” Long)
2 1434-SDS
1/4” x 3/4” Self Drilling Screws
3 13814-1SRW
1 3/8” OD One Side Rubber Washer
NOTE: Secure the Vinyl Sock using
three (3) 1/4” x 3/4” Self tapping Screws
and three (3) 1 3/8” One-Side Rubber
Washer (12 total) at the end of each side
of the Flow Control Spout.