J&M 818 - Manual (Page 15)

REPAIR PARTS LIST AND DIAGRAMS
When performing maintenance work, wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands,
hearing and head. Follow the Operator’s Manual instructions to ensure safe and proper maintenance and repair.
Your local, authorized dealer can supply genuine replacement parts. Substitute parts may not meet original equipment
specifi cations and may be dangerous.
WARNING
MAKE SURE ALL POWER IS SHUT OFF BEFORE PERFORMING ANY MAINTENANCE OR REPAIR WORK.
!
HUB AND SPINDLE ASSEMBLY
14
10
7
3
5
2
12
6
4
8
9
11
17
16
17
15
16
10
14
Weigh-Spindle
(for carts equipped with scales)
#
1
1
2
3
4
5
6
7
7
8
9
10
11
12
13
14
14
15
16
16
17
17
Part #
HSA-650
HSA-650S
W-881
4T-HM218248
HM212049
910344
910384
CR-43771
37605SA
913635
912973
905945
909921
913564
913571
281900
375WS
ATP-375
785-HB
58612G5B
78G5LN
58G5LN Description
Hub and Spindle Assembly Complete (non-scale)
Hub and Weigh Spindle Assembly Complete (scales)
Hub with large and small races, 3/4” studs and nuts (13.19” bolt circle) (11.13” pilot)
Large Bearing (910346) (HM2128248)
Small Bearing (910347) (HM212049)
Large Race (HM212210)
Small Race (HM212011)
Seal for non-scale spindle (6” OD, 4 1/2” ID) 1-906979
Seal for scale spindle (6” OD, 3 3/4” ID)
Spindle Washer
Slotted Spindle Nut
Cotter Pin
Dust Cap
3/4”-16 Wheel Stud
3/4”-16 Wheel Nut
4 1/2” Spindle x 30 1/2” (for grain cart equipped WITHOUT electronic scale system)
3 3/4” Weigh Spindle (for grain cart equipped WITH electronic scale system)
4 1/2” OD Adapter Pipe Tube (for scale spindle)
7/8” x 5” Grade 5 Bolt (for 4 1/2” non-scale spindle)
5/8” x 6 1/2” Grade 5 Bolt (for 3 3/4” scale spindle)
7/8” Grade 5 Lock Nut (for 4 1/2” non-scale spindle)
5/8” Grade 5 Lock Nut (for 3 3/4” scale spindle)
- 15 -