J&M 875-16 - Manual (Page 23)

23
Installation of Scale Kit (Single Wheel Application)
For Models 525-14W, 620-14, 750-14, 750-16, 750-18, 875-16 and 875-18
LAYOUT DIAGRAM
PARTS LIST
(Weigh-Tronix or Digi-Star Scale Systems)
NOTE:
When inserting both the weigh spindles
or the hitch weigh bar, be sure that the
TOP of the spindle is in the upright
position as indicated by the decal on
each weigh bar.
Failure to correctly align the weigh bar
and spindles in the upright position will
cause the scale system to read with
greater inaccuracy.
To connect the Power Cord to the Indicator Box, attach screw plug end of the Power Cord into the power port of the
Indicator Box. To connect to the battery, secure the Red Wire of the Power Cord to the Positive Terminal of the
battery and the Black Wire to the Negative Terminal. Be sure any additional wires provided by the Power Cord are
properly stored and secured.
CONNECTING THE POWER CORD
1.
#
W/T
Part #
D/S
Part # Description
W/T
Qty
D/S
Qty
1 375WTS 375WS Rear Weigh Spindle w/ Cable 2 2
2 25WB 250WB Front Hitch Weigh Bar w/ cable 1 1
3 615
915 EZ-400
-------- Indicator Box w/mounting plate
Indicator Box w/mounting plate 1
1 1
0
4 -------- JB-1 Junction Box 0 1
5 PC-2 PC-1 Power Cord (to battery) 1 1
6 -------- ECI-1 Extension Cord (to mount in tractor cab) 0 1
7 37605SA 37605SA Seal (Hub) 2* 2
8 ATP-375 ATP-375 Adapter Tubing Pipe 2* 2
9 MBI-2 MBI-1 Mounting Bracket for Indicator 1 1
10 WBW-1 WBW-1 Weigh Bar Weldment 1 1
11 BB-2 BB-2 Battery Box with strap 1 1
12 343-BWN 343-BWN 3/4" x 3" Bolt (G8) w/ hvy lock washer, nut 4 4
13 MB-58612 MB-58612 5/8" x 6 1/2" Bolt (G5) with nut 2 2
14 MB-381 MB-381 3/8" x 1" Bolt with nut 4 6
15 -------- PB-10 #10 Pan Bolt with nut 0 4
16 MB-1434 -------- 1/4" x 3/4" Bolt with nut 4 0