J&M 1150-20D - Manual (Page 19)

17
DRIVE LINE ASSEMBLY
UPPER AND LOWER AUGER ASSEM-
# Part # Description
1 252288 U-Joint (drive shaft to gearbox)
2 UCF-20928 1 3/4” Flange Bearing, 4 hole
3 38112 3/8” x 1 1/2” Half Moon Key
4 SS-3812 3/8” x 1/2” Set Screw
5 SS-1212 1/2”-20 x 1/2” Set Screw
6 DS-134150 Drive Shaft, 1 3/4” x 150”
7 GDS-134150 Guard for Drive Shaft (incl. plastic shield)
8 3S-DUJ Shield over U-joint
9 CK-44R Cross Kit (U-joint) 44R
# Part # Description
1 LF-20 Lower Flighting welded to 4 1/2”
pipe x 147 1/2”
2 UF-20 Upper Flighting welded to 4 1/2”
pipe x 120 3/4”
3 SC-25X3 Spline Coupler 2 1/2”OD x 3”
4 DDW-21220 Drive Dog Weldment, 2 1/2”ID
5 1610BL Grease Zerk
6 HBA-20 Hanger Bushing Assembly
7 16HBN 1” x 6” Bolt (G8) w/Lock Nut
8 134-P20 1 3/4” x 19 1/2” Pin
9 12-W 1/2”ID Large Washer
10 LW-12 1/2” Lock Washer
11 12114HB 1/2” x 1 1/4” Hex Bolt
12 JD236 2” x 36” Hydraulic Cylinder
13 JD472 Seal Kit for 2” x 36” Hyd. Cyl.
14 ICR4 1” x 4” Pin
15 GI-12-6B 1/2” Gate Indicator Rod (bent)
16 HN-114 1 1/4” Hex Nut
17 BB-212 2 1/2” Bronze Bushing
18 112S 1 1/2” Long Spacer
19 GRAF-206 4 Hole Flange Bearing
20 CMSUAA-4 Compression Spring
21 MB-126 1/2” x 5 1/2” Hex Bolt w/Nut
22 UAH-20 Upper Auger Tube Assembly