J&M 1325-20T User Manual
Page 6
Advertising
![background image](/manuals/325602/6/background.png)
4
GENERAL INFORMATION
BOLT TORQUE CHART
Always tighten hardware to these values unless a different torque or tightening procedure is listed for a
specific application.
Fasteners must always be replaced with the same grade as specified in the manual parts list.
Always use the proper tool for tightening hardware: SAE for SAE hardware and Metric for metric hard-
ware.
Make sure fastener threads are clean and you start thread engagement properly.
Advertising
This manual is related to the following products: