J&M HT-1082 - Manual (Page 13)

Pg. 13
PARTS LIST
Tie-Down Bracket and Adjustable Header Mount
Adjustable Upper Bar Mount
# Part # Description
1 UBCM-3 Upper Bar Channel Mount
2 UBSA-3 Upper Bar Support Arm
3 UBSM-3 Upper Bar Slide Mount
4 UBC-3 Upper Bar Clamp
5 HP-586 5/8" x 6" Pin
6 316HP 3/16" Hair Pin
7 121-B 1/2" x 1" Bolt
8 12LN 1/2" Lock Nut
# Part # Description
1 AB-L2 Lower Adjustable Bracket
2 AB-U2L Upper Adjustable, Bracket (L/H)
2 AB-U2R Upper Adjustable, Bracket (R/H)
2 AB-U2L-MD Upper Adj. Bracket (L/H)
(MacDon)
2 AB-U2R-
MD
Upper Adj. Bracket (R/H)
(MacDon)
3 CHA2 Clamp Handle Assembly
4 CB58612 Carriage Bolt, 5/8" x 6 1/2"
5 3412P 3/4" x 12" Pin
6 HC-CP Cotter Pin
7 TDMB-2 Tie Down Mounting Bracket
8 RA-1 Ratchet
9 TDS-1 Tie-Down Strap and Hook Assy.
9 TDS-1L Tie-Down Strap and Hook Assy w/
D-Ring Strap (for MacDon heads)
10 12512G5B 1/2" x 5 1/2" Grade 5 Bolt
11 12LN 1/2" Lock Nut
12 12234G5B 1/2" x 2 3/4" Grade 5 Bolt
13 12NLN 1/2" Nylon Lock Nut