F l d 1, Field screen – J&M GT460 User Manual
Page 11
Operators Manual
D3804 11
FIELD SCREEN
Note: Field names can be uploaded from a PC using a USB flash drive.
See pg 13.
Field names can be a maximum of 26 characters long.
Field names can be changed using the keypad before unloading.
1
Press to modify or select field. Current field number is shown in
upper display.
2
Three lines are displayed in Lower Display Window. The top line of the
three is current, editable and will be used for next data record.
3
Up/Down Arrows – Press or to scroll through fields (150 maximum).
Hold arrow to scroll faster. Use or to move cursor within data line.
4
Use keypad to enter or update field names. Press to delete
characters to left and to delete the selected character. Hold
to delete entire line. Pressing will reset line to last saved data.
5
To use special characters press and release .. Then press key
with desired special character. Repeat for each special character
required.
6
Press or to exit.
J o n e s h i l l c o r n
D e n n y ’ s f a r m f i e l d 1 2 c o r n
K e l l y g r a i n s e c 3 3 f c o r n
F l d 1
2
3
4
5
6
1
1
6
4
4