You’re done, Light kit (continued), See next page for fan operation instructions – Hunter 54015 54 Crown Park User Manual
Page 15
www.HunterFan.com
1.888.830.1326
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
Install a bulb into each of the
sockets. When necessary, replace
with bulbs of same wattage.
See next page for fan
operation instructions.
Connect the appropriate pull
chain pendant to each of the
short chains coming from the
switch housing.
Note: In compliance with US federal energy regulations, this ceiling fan
contains a device that restricts its light output. Exceeding the wattage
limit marked on the MAX wattage sticker affixed to the light socket(s)
may result in fire hazard or improper operation.
Fan
Pull
Chain
Light
Pull
Chain
Bulb
Insert three (3) switch
housing screws found in the
hardware bag.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
M3508-01 • 01/02/13 • © Hunter Fan Company
15