American Panel HURRICHILL AP20BC175-2 - Manual (Page 26)

AP20BC175-2 Manual
25
The display will show briefly:
Then the display will show:
STARTING CYCLE . . .
alternating with
01:29
Will count
down
The MANUAL mode uses time and the air probe temperature to control the cycle.
The default total time for a soft cycle is 90 minutes. After the 90 minutes the unit will automatically
go into holding mode
03.07.2006 10:41 AM
AIR 1 75°F
01:29
.
The display will show:
R / CHICKEN 140°F
Y / ROAST BEEF 143°F
B / CHICKEN 141°F
G / ROAST BEEF 142°F
alternating with
00:00 Blinks
The operator can now end this cycle by pressing ("START/ STOP").
The display will show briefly:
Then the display will show:
03.07.2006 10:41 AM
AIR 1 34°F
00:00
R / CHICKEN 40°F
Y / ROAST BEEF 40°F
B / CHICKEN 40°F
G / ROAST BEEF 40°F
STOPPING CYCLE . . .
OPERATING MODE
CHOOSE
OPERATING CYCLE
3. HARD CHILL CYCLE
To perform a hard chill cycle, follow steps 1 or 2 (above), EXCEPT in step 1.b (above) press
instead of .
4. DEFROST CYCLE
The defrost cycle runs the evaporator fan for 5 minutes
with the door open.
a. To perform a defrost cycle, press the
("DEFROST") button.
OPERATING MODE
CHOOSE
OPERATING CYCLE