Hunter 59039 54 Windemere - Manual (Page 12)

www.HunterFan.com
1.888.830.1326
M3521-01 • 05/14/14 • © Hunter Fan Company
Put the blade washers, found in
the hardware bag, onto the blade
screws, found in the hardware
bag. Then install the blade screws to
secure each blade to a blade iron.
Blades
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the finishes.
12
Lightly attach the blade irons to the
motor with screws found in
the hardware bag, then securely
tighten after both screws are attached.