Hunter 54016 54 Willowcrest - Manual (Page 15)

www.HunterFan.com
1.888.830.1326
Light Kit (continued)
See next page for fan
operation instructions.
Connect the appropriate pull
chain pendant to each of the
short chains coming from the
switch housing.
Note: In compliance with US federal energy regulations, this ceiling fan
contains a device that restricts its light output. Exceeding the wattage
limit marked on the MAX wattage sticker affixed to the light socket(s)
may result in fire hazard or improper operation.
Remove the socket rings from the
sockets. Install the shades onto
the sockets. Install the socket
rings onto the sockets. Tighten
them by turning clockwise with
the socket ring glass tool.
Install a bulb into each of
the sockets. When necessary,
replace with bulbs of the same
type and wattage.
CONGRATULATIONS!
YOU’RE DONE!
Shade
Fan
Pull
Chain
Light
Pull
Chain
Bulb
Socket
Ring
Socket
Ring
Tool
M0098-01 • 04/16/14 • © Hunter Fan Company
15