Switch housing & light kit (continued) – Hunter 59135 54 Key Biscayne User Manual
Page 15
www.HunterFan.com
1.888.830.1326
15
M3556-01 • 06/17/14 • © Hunter Fan Company
Switch Housing & Light Kit (continued)
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
Partially install three light kit assembly
screws, found in the hardware bag,
into the posts as shown, leaving the
circled post empty.
Connect the plugs from the upper and lower
switch housings. Make sure to line up the
colored markings on the connectors.
Align the three keyhole slots in the
light kit with the three assembly screws
in the posts. Lift the light kit and twist
clockwise to lock it into place. Be sure
that both pull chains are hanging freely.
Light Kit
Assembly
Screw
Keyhole
Slot
Empty
Post
Use only the light kit supplied with
this fan model.