Hunter 28752 52 Conlee - Manual (Page 15)

15
42470-01 • 10/07/11 • Hunter Fan Company
Installing the Glass Bowl
8-8. First install B10 candelabra bulbs (60 Watt Maximum) into the
sockets.
8-9. Thread the light and fan pull chains through the hole in the center
of the glass bowl. Then, thread the light pull chain through the hole
in the center of the cover plate.
8-10. Thread the fan pull chain through the grommet hole in the side of
the cover plate.
8-11. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
8-12. Thread the light pull chain through the finial and screw the finial
onto the threaded rod end until tight.
8-13. Attach the extra pull chains (included) to the light and fan
pull chains using the breakaway connector. (You may find the
breakaway connector on the end of the
extra chain.)
8 • Completing Your Installation With a Bowl Light Fixture (Continued)
Light Bulb
Socket
(B10
Candelabra-
Based 60 Watt
Maximum)
Threaded Rod
Metal Disc
Glass Bowl
Cover Plate
Finial
Conector
desmontable