Hunter 23855 52 Classic Original - Manual (Page 10)

Hunter Fan Company 41532-01 • 10/22/13
10
NOTE: Your canopy comes pre-assembled. Uninstall the canopy screws and separate the two halves
of the canopy before continuing to step 1.
1. Assemble canopy halves around pipe, and loosely install the canopy assembly screws.
2. Slide canopy up close to ceiling.
3. Tighten the canopy assembly screws (see Fig. 10).
4. Tighten the canopy set screw (see Fig. 10).
Installing The Canopy
Fig. 10
Canopy
Canopy Set Screw
Canopy Assembly
Screw