Light kit (continued) – Hunter 59010 52 Domino User Manual
Page 15
www.HunterFan.com
1.888.830.1326
Light Kit (continued)
Note: In compliance with US federal energy regulations, this ceiling fan
contains a device that restricts its light output. Exceeding the wattage
limit marked on the MAX wattage sticker affixed to the light socket(s)
may result in fire hazard or improper operation.
Place the finial up against the glass bowl.
Align the holes in the cover plate and glass
bowl. Screw the finial onto the threaded
rod end until tight.
Finial Cap
Finial
Glass Bowl
Threaded Rod
Attach the extra pull chains (included)
to the fan pull chain and light pull chain
using the breakaway connector. (You may
find the breakaway connector on the end
of the extra chain.)
Thread the pull chains through the holes
in the metal disc. Then, thread the pull
chains through the hole in the center of
the glass bowl. Thread the pull chains
through the grommet holes on the sides
of the finial cap.
Finial Cap
Metal Disc
M3539-01 • 07/17/13 • © Hunter Fan Company
15