Hunter 28671 52 Infiniti - Manual (Page 14)

14
42435-01 • 05/24/10 • Hunter Fan Company
8 • Completing Your Installation With a Bowl Light Fixture (Continued)
8-4. Remove the plastic breakaway connector from the bottoms of
both pull chains. Discard both plastic breakaway connectors.
8-5. Install the pull chain with the light pendant attached to the chain
on the right side of the Hunter logo on the body of the fan. Attach
the pull chain with the fan pendant to the chain on the left side of
the Hunter logo.
CAUTION: Make sure the light fixture is securely attached to
the switch housing. Failure to properly attach and tighten all four
assembly screws could result in the switch housing and light fixture
falling.
Light
Fan
Speed
Hunter
Logo
Step 8-5
Breakaway
Connector