Light kit (continued) – Hunter 53260 52 Morris County User Manual

Page 15

Advertising

www.HunterFan.com

1.888.830.1326

Light Kit (continued)

Press the globe assembly flush against the

metal plate and attach the globe keeper.

Thread the light pull chain through the hole

in the center of the finial cap and thread

the fan pull chain through the hole in the

side of the cap. Finally, thread only the light
pull chain through the hole in the finial and

screw the finial onto the threaded rod.

Install a bulb into each of the sockets. When

necessary, replace with bulbs of the same

type and wattage.

Finial

Cap

Globe

Keeper

Globe

Metal

Plate

Note: In compliance with US federal energy regulations, this ceiling

fan contains a device that restricts its light output. Exceeding the

wattage limit marked on the MAX wattage sticker affixed to the

light socket(s) may result in fire hazard or improper operation.

Set the trim ring so the tabs rest on the rim

of the globe to hold the trim ring in place.

Note: Globe style and number of lights may vary.

Tab

Advertising