Hunter 53038 52 Millington - Manual (Page 14)

www.HunterFan.com
1.888.830.1326
Switch Housing (continued)
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
Connect the plugs from the upper and
lower switch housings. Make sure to line up
the colored markings on the connectors.
Lift the lower switch housing until its screw
holes are aligned with the screw holes in the
upper switch housing. Install the three switch
housing screws, found in the hardware
bag. Tighten all three screws.
Installing the pull chain pendant - Attach the
pull chain pendant to the short chain coming
from the switch housing.
14
M0049-01 • 02/22/13 • © Hunter Fan Company