You’re done, Switch housing & light kit (continued), See next page for fan operation instructions – Hunter 59148 52 Raefield User Manual
Page 15
www.HunterFan.com
1.888.830.1326
Switch Housing & Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
See next page for fan
operation instructions.
Loosen the pre-installed globe
assembly thumbscrews. Lift
the globe into the light fixture
and retighten the thumbscrews
securely. Do not overtighten.
Connect the appropriate pull
chain pendant to each of the
short chains coming from the
switch housing. The fan pull chain
controls the speed: from high to
off. The light pull chain controls
the light fixture: on and off.
Remove the pull chain
connectors from the pull chains
coming from the fan.
Note: In compliance with US federal energy regulations, this ceiling fan
contains a device that restricts its light output. Exceeding the wattage
limit marked on the MAX wattage sticker affixed to the light socket(s)
may result in fire hazard or improper operation.
Globe
Assembly
Thumbscrew
M3548-01 • 12/19/13 • © Hunter Fan Company
15