Acoustic Research AR4200 - Manual (Page 23)

Memorizing TV Channels
(continued)
Setting Auto Fine Tune (AFT)
search
source
autoset
<select> to enable
auto fine tune
fine tune
channel skip 50
1
Press to select or VOL+/- on off. 3
Press repeatedly to select item. CH auto fine tune
6
2
When the AFT is set to On, the unit will automatically tune
the program frequency to provide the best possible
picture and sound.
Manual Fine Tuning
1
Press repeatedly to select item. CH fine tune
6 2
right/left to adjust automatic fine tune
3
Press to fine tune till the best possible picture and
sound are obtained.
VOL+/-
Adding and Erasing Channels
2
Press repeatedly to select item. CH channel skip
6 3
Use to directly select a channel that will
be added or erased.
number buttons
1
4
Press to select or VOL+/- on off.
When the item is set to on, the selected channel will be
erased.
off, the selected
channel will be added.
The erased channels can not be selected by using the
buttons unless you use to input
channel number directly.
When the item is set to
CH / number buttons 5 6
search
source
autoset
<select> to enable
auto fine tune
fine tune
channel skip
right/left to adjust fine tuning
50
search
source antenna cable
autoset <select> to enable
auto fine tune on off
fine tune
channel skip on off
right/left to set channel skip
50
20
antenna cable
off on
off on
antenna cable
off on
off on
If you fine tune a program manually, the
item will be turned to
automatically.
auto fine tune
off
Repeat steps 1~4 in [ ] to
display menu page.
Selecting the Signal Source
search
Repeat steps 1~4 in [ ] to
display menu page.
Selecting the Signal Source
search
Repeat steps 1~4 in [ ] to
display menu page.
Selecting the Signal Source
search