Hunter 28680 52 Waldon Five Minute Fan - Manual (Page 11)

11
42439-01 • 06/15/10 • Hunter Fan Company
11
Our exclusive Easy Lock ™ blade assembly enables you to lock the blades
in place without tools.
6-1. Align the holes in the blade with the blade iron.
6-.2 Push the blade down onto the three blade iron posts; you will feel
it lock into place.
CAUTION: Be sure blade is locked into place and that the head of each
blade iron post is completely visible. Refer to the figure on the right.
6-3. Repeat steps 6-1 through 6-2 until all blades are installed.
Blade Removal:
1. Cover the blade iron posts with a protective cloth to prevent
scratching the blades.
2. Using pliers, loosen the blade iron posts by turning them
counterclockwise. Once they are loosened, finish unscrewing them
by hand until they are completely separated from the blade iron.
3. Carefully remove the blade.
Note: The blades on this fan have been treated
with Hunter’s Dust Armor protection, making
the blades less likely to attract dust and dirt.
Use a dry or slightly damp lint free cloth to
clean the blades. Do not use a furniture polish
or any other cleaners that leave any residue, as
they will damage the protective Dust Armor
on the blades. Step 6-1
Step 6-2
6 • Assembling the Blades