Hunter 59085 48 Fanaway - Manual (Page 15)

www.HunterFan.com
1.888.830.1326
Remote Control
ON
Turn Power
To access the battery compartment,
remove the small Phillips head screw that
secures the battery door to the transmitter
assembly. The battery should be installed
with the positive (+) side up. Replace with
a CR2032 battery when necessary.
Phillips
Head
Screw
Battery
Door
Within 3 minutes of restoring power to
the fan, press both the Fan Off button and
the High button for at least 4 seconds. Your
fan will turn on low to indicate successful
syncing. If it does not, turn off power to
your fan, wait 1 minute then try again. If
using the transmitter with multiple fans,
repeat this process for each fan.
Note: The remote must be paired before
the fan will operate.
Fan Off
High
The Fan Off button only turns the fan off.
To turn the fan on, press one of the fan
speed buttons.
High
Medium
Low
Quickly press the Light button to turn the
lights off and on.
Low
Medium
High
Fan Off
Light
ooo
oo
o
15
M3531-01 • 05/14/14 • © Hunter Fan Company