Blades – Hunter 51026 44 Dreamland User Manual
Page 12
Advertising
www.HunterFan.com
1.888.830.1326
Blades
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the finishes.
12
Lightly attach the blade irons to the
motor with screws found in
the hardware bag, then securely
tighten after both screws are attached.
Remember the screws that
you kept after removing the
shipping blocks (page 6)? You
need them plus five more from
the hardware bag for this step.
M0005-01 • 11/02/12 • © Hunter Fan Company
Put the blade washers found in the
hardware bag onto the blade screws found
in the hardware bag. Then install the
blade screws to secure each blade
to a blade iron.
Advertising