CHIEF KSA1023 - Manual (Page 8)

KSA-1023 Installation Instructions
8
CPU Installation
1. Set CPU Support Bracket (B) on top of CPU Wall Mount
Plate (A). (See Figure 10)
2. Use knobs (C) to secure CPU Support Bracket (B) to CPU
Wall Mount Plate (A). (See Figure 10)
Figure 10
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the KSA-1023 up to (and
including) the display/projector does not exceed 50 lbs (22.7
kg).
3. Insert CPU into CPU Wall Mount. (See Figure 11)
NOTE: Center CPU on the mount to ensure weight of CPU is
evenly distributed.
Figure 11
4. Loosen knobs (C) below CPU Wall Mount in order to allow
adjustment.
5. Collapse the mount until it fits tightly around CPU. (See
Figure 12)
Figure 12
6. Tighten knobs (C) below CPU Wall Mount to secure plate in
position. (See Figure 12)
(C) x 2 2
3
(side view) (C) x 2
6
5