CHIEF PACTP1 - Manual (Page 5)

Installation Instructions PACTP1
5
Bracket Installation
1. Assemble cart assembly according to installation
instructions included with cart.
2. Remove rear two 5/16-18 x 3/4" button head cap screws
from cart stand. (See Figure 1)
Figure 1
3. Connect two side pitch brackets (A) to faceplate using four
1/4-20 x 1/2" button head cap screws (D). (See Figure 2)
Figure 2
4. Connect column attachment bracket (B) to side attachment
brackets (C) using four 1/4-20 x 1/2" button head cap
screws (D). (See Figure 4)
Figure 3
5. Secure column attachment bracket (B) to cart column using
two 5/16-18 x 1" button head cap screws (E). (See Figure 4)
6. Use pitch adjustment knob to adjust pitch to desired level.
(See Figure 4)
7. Connect two side attachment brackets (C) to side pitch
brackets (A) using two 1/4-20 x 1/2" button head cap screws
(D) and two 1/4" washers. (See Figure 4)
Figure 4
2 X 2
(A) x 2
(D) x 4 2
(C) x 2
(B)
(D) x 4 4
7 (D) x 2
(F) x 2
(C) x 2
(B)
5 (E) x 2
pitch
adjustment
knob