Assembly and installation – CHIEF MAC230 User Manual
Page 5
Installation Instructions
PAC230/MAC230
5
Assembly And Installation
1.
Install MSBUB and display to pole according to MSBUB
installation instructions.
2.
Position one attach bracket (B) with MSBUB horizontal
mounting brackets so that the holes on tabs of attach
bracket line up with holes on horizontal mounting brackets.
(See Figure 1)
3.
Use four #10-24 x 1/2" button head cap screws (C) to
connect attach brackets (B) to MSBUB horizontal mounting
brackets. (See Figure 1)
4.
Repeat Steps 2-3 for other attach bracket on the opposite
side.
Figure 1
5.
Use three (MAC230) or four (PAC230) #10-24 x 1/2" button
head cap screws (C) and #10 washers (D) to secure one
side of back cover (A) to attach bracket (B). (See Figure 2)
6.
Wrap back cover (A) around mount and line up holes on
other attach bracket (B) with holes on other side of back
cover (A). (See Figure 2)
7.
Use three (MAC230) or four (PAC230) #10-24 x 1/2" button
head cap screws (C) and #10 washers to secure the other
side of back cover (A) to attach bracket (B). (See Figure 2)
Figure 2
3
(B) x 2
(C) x 8
(MAC230 shown)
2
2
5
(C) x 3 or 4*
(D) x 3 or 4*
6
7
(C) x 3 or 4*
(D) x 3 or 4*
(MAC230 shown)
*4 screws and washers for PAC230