CHIEF MAC400 User Manual
Mac-400, Caution, Mid-size flat screen rotation accessory
INSTALLATION INSTRUCTIONS
8805-000159 REV. A
10/26/05
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]
MAC-400
MID-SIZE FLAT SCREEN ROTATION ACCESSORY
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.
Figure 1
(1) Rotation Assembly
(4) Mounting Buttons – Tapped 10-24
(4) 10-24 x .5” Flat Head Cap Screws
(1) Locking Strap
(2) ¼-20 x .5” Button Head Cap Screws
(2) ¼-20 x .5” Security Button Head Cap Screws
(2) ¼-20 Square Nuts
(1) 5/32” Security Hex Key
(1) 1/8” Hex Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
CAUTION!
FLAT SCREEN DISPLAYS ARE EXTREMELY FRAGILE.
NOTE: The MAC-400 adds 0.94”of depth and 6 lbs (2.72 kg) to overall installation. It is the installer’s responsibility to ensure that
combined weight of screen and MAC-400 does not exceed the maximum support weight of the mount.
1. Remove screen from Chief Mount or, if not installed, install MSB interface bracket to back of screen per instruction supplied
with the interface.
2. Attach mounting buttons to Rotation Assembly, using the four 10-24 x 1/2” flat head cap screws. Make sure the buttons are
securely fastened. .
Figure 2
Figure 3
ATTACH
MOUNTING
BUTTONS
HERE