CHIEF PACHFK2 - Manual (Page 2)

PACHFK2 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: This equipment must be installed and
assembled by qualified service personnel in accordance with
local building codes. The wall to which the mount is being
attached may have a maximum drywall thickness of 5/8"
(1.6cm).
WARNING: Failure to provide adequate structural strength
for this accessory can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support the combined weight of the PAC-502 accessory
and all attached equipment not to exceed 200 lbs (90.72 kg).
DIMENSIONS
20.00
INSIDE
SPACING
.31
7.9
CUTOUTS PROVIDE CLEARANCE
FOR ELECTRICAL KNOCKOUTS ON
PAC-502 ENCLOSURE
1.50
38.1
18.60
472.6
1.75
44.5
20.21
OUTSIDE
SPACING
513.3
.84
21.4
.31
7.9
DIMENSIONS: INCHES
[MILLIMETERS]