CHIEF PACHFK1 User Manual
Page 7
Advertising
Installation Instructions
PACHFK1
7
7.
Orient PAC-501 enclosure following the installation
instructions provided with the PAC-501 and slide enclosure
into opening between upper and lower brackets (A).
(See Figure 7)
Figure 7
8.
Secure PAC-501 enclosure to brackets using eight flat
washers (E) and eight button head cap screws (F) using the
3/16" hex wrench (G) provided. (See Figure 8)
CAUTION:
PAC501 enclosure must be secured on both
sides to side studs using lag screws and bushings following
the installation instructions provided with the PAC501
accessory.
Figure 8
7
(F) x 8
(F) x 8
(E) x 8
8
Advertising