Tools / hardware / parts assembly and installation – CHIEF NAF15BA User Manual
Page 3
Installation Instructions
NAF15BA
3
TOOLS / HARDWARE / PARTS
ASSEMBLY AND INSTALLATION
NOTE:
The NAF15BA fan panel is designed for use with 19"
wide equipment racks. See the specific installation
instructions provided with the rack for additional
installation information.
1.
Attach the fan panel (A) within the rack, using four 10-32 x 3/4"
header point Phillips screws (not included). (See Figure 1)
Figure 1
2.
Plug the adapter (C) into the DC power supply (B).
3.
Plug power supply into back of NAF15BA fan panel (A).
(See Figure 2)
4.
Secure power supply plug using a cable tie (not included)
through the cable tie mount. (See Figure 2)
Figure 2
5.
Plug the power supply into an available outlet.
6.
Complete the installation following the rack installation
instructions.
A (1)
[Fan panel]
B (1)
[DC power supply]
Hardware required, not included:
(4) 10-32 x 3/4" header point Phillips screws
(1) 4" cable tie
C (1)
[Adapter]
(A)
1
x 4
(NE1F2023 rack shown as example)
3
(A)
Cable tie
mount
(rear view)
4