CHIEF NAWS1 - Manual (Page 5)

Installation Instructions NAWS1
5
3. Drill four 5/16" (7.9mm) pilot holes at points marked in Step
2. (See Figure 2)
4. Install an anchor (not included) into each pilot hole. (See
Figure 2)
5. Use four 5/16 x 2-1/2" lag bolts (not included) and four 5/16"
flat washers (not included) to attach shelf to wall. (See
Figure 2)
Figure 2
3
4
2
x 4
x 4
5 x 4