ClimaCool UCA Manual - Manual (Page 11)

11
www.climacoolcorp.com
Single(combine
withbackǦtoǦback)
EndǦtoǦEnd
ONLY
Single(combine
withendǦtoǦend) BackǦtoǦBack
833/4 833/4 393/4 Ǧ 84
833/4 1681/2 393/4 801/2 84
1681/2 2531/4 393/4 801/2 84
1681/2 338 393/4 801/2 84
2531/4 4223/4 393/4 801/2 84
2531/4 5071/2 393/4 801/2 84
338 5921/4 393/4 801/2 84
338 677 393/4 801/2 84
4223/4 7613/4 393/4 801/2 84
4223/4 8461/2 393/4 801/2 84
5071/2 9311/4 393/4 801/2 84
5071/2 1016 393/4 801/2 84
2Modules
3Modules
4Modules
5Modules
Height
(inches)
Depth(inches) Width(inches)
ModelUCA
9Modules
10Modules
11Modules
12Modules
6Modules
1Module
7Modules
8Modules
Notes:
1. Modular chiller bank width dimensions above include 1” for spacing between modules (Refer to page 12 -
Water Piping Confi guration - Figure 1). Example: 5 modules in an end-to-end confi guration is 422 3/4” wide or
in a back-to back confi guration is 253 1/4” wide and 80 1/2” deep.
2. When piping more than 5 modules, it is recommended to use reverse return (Refer to page 12 - Water
Piping Confi guration - Figure 2). Example: 7 modules in an end-to-end confi guration is 592 1/4” wide or in a
back-to-back confi guration is 338” wide and 80 1/2” deep.
3. Maximum water fl ow rates for both evaporator and condenser water header systems in one bank of
modules is 1,000 GPM.
Bank Dimensions