Contemporary Research ICC1-232 RS-232 - Manual (Page 6)

Contemporary Research 6 ICC1-232 Manual
Installation
Setting Device Number and Parameters
In the next step, you’ll need to set up the device number and operation parameters for the ICC1-232. Turn the
enclosure so that the DIP switches are on the bottom as shown.
1. Make sure S2 Switch 6 is OFF (unit in Device mode).
2. Set the Device number by turning on the switches that add up to the desired device number. For
example, for Device #259, turn on S1 switches 1 and 2 (3), S2 switch 1 (256)
Zone Switch Settings
To define the controller’s Zone #, use the following pattern of switches ON for the S2 DIP.
Zone Value 1 2 3 4
256 512 1024 2048
1 256 X
2 512 X
3 768 X X
4 1024 X
5 1280 X X
6 1536 X X
7 1792 X X X
8 2048 X
9 2304 X X
10 2560 X X
11 2816 X X X
12 3072 X X
13 3328 X X X
14 3584 X X X
15 3840 X X X X