Contemporary Research IP-232 Ethernet to RS-232 Interface - Manual (Page 4)

Specifications
Physical Size: 5.5” [140mm] wide x 1.1” [28mm] height x 3.5” [86mm] deep
Weight: 8 oz [226g]
Enclosure: All aluminum with durable black powder coat paint
Mounting: Mount alongside CR tuner in RK-1 or RK1-HD, rack-mount in RK3 rack kit
Standards: RoHS compliant and energy-efficiency meets new California standards
RS-232 Connector: DB-9 male, 300 to 19,200 baud (9600 default)
LEDs: Tx (Red), Rx (Yellow)
Ethernet Connector: 10/100baseT RJ-45 jack, RX/TX LEDs indicate Ethernet data send and receive
Power over Ethernet (PoE): Supports A and B modes
Setup DIP switches on bottom of case for in-field setup
Programmable via RS-232 port or remote setup via Ethernet
Power Power LED: Green LED lights when DC power is active
Power In: 2.1mm coaxial jack (inside center conductor positive), 150 mA maximum
11 to 28 VDC, 12 VDC typical (may be unregulated)
POE 1.6 watts
DIP Switches Two 8-position switches, S1 and S2 on the bottom of the enclosure
Includes
1 Space-saving 12 VDC 500 mA digital switching power supply (North American only)
Options CC-232 Custom RS-232 cable
RK-1 Rack Kit to mount IP-232 alongside CR analog 232-series tuner
RK-HD1 Rack Kit to mount IP-232 alongside CR IP-232 tuner
RK3 Rack Mount Kit, 1RU, accepts up to three AV Tools