Delta Controls T01 - Manual (Page 3)

002522-SENTRY-C : FEB 2012
www.delta-controls.com
DIMENSIONS
Model Range DIM A DIM B DIM C
P02 / P03 ALL 187 - -
D01 BC 250 162 89
D02
BD - CE 238 114 77
DC - EA 238 88 77
D03
0D - 0E 263 192 102
DC - EA 263 166 102
T01 / T02 ALL 187 - -
MAINTENANCE
Inspections should be carried out at quarterly to yearly intervals depending upon operating conditions. Isolate
the unit from process and power and remove the lid. Check all terminals for tightness. Check that cable tails
are not fouled or chafed. Check for internal condensation. Check that the gasket is seated properly in the lid
recess and is not worn. It is recommended that instruments used to provide an alarm are operated periodically
to ensure they are functioning correctly. If further maintenance is required seek advice from DELTA CONTROLS
before attempting repair or replacement of parts.