ACT Meters 720 Datalogging Multimeter - Manual (Page 10)

ACT 720
Features
www.actmeters.com
+44(0)1744 886660
Analog Bargraph Display
Visual indication of measurement in the tradition of an analog meter pointer. The bargraph
consists of 52 discrete viewing segments. The bargraph is useful for detecting faulty
contacts, identifying potentiometer graduations and viewing signal spikes.
True RMS v Average Sensing (AC Measurements)
True RMS meters can accurately measure non-sinusoidal waveforms, as well as distorted
sine waves that contain harmonics. Average sensing is a fast, accurate and cost effective
method of measuring pure sine wave signals. However, non-sinusoidal waveforms cannot
accurately be measured using average sensing techniques.
Backlit Display
The ACT 720 is equipped with a backlight for viewing the LCD display in poorly lit areas
Data Hold
The HOLD function freezes the reading on the display for later viewing
Manual and Automatic Ranging
The ACT 720 is autoranging with manual override
Smart Power Auto Power Off
Smart power shuts the meter down automatically after appromimately 17 minutes of
inactivity
Audible Beeper
To disable the audible meter tones, press and hold the Hz key while powering the meter
Automatic Test Lead Resistance Compensation
Automatically compensates for the resistance of the test leads, as well as the internal
protection circuitry, ensuring greater accuracy of low resistance measurements
Datalogging
The ACT 720 will store reading for review on the LCD display or download to a PC using the
supplied software