ALLIED Vision Technologies Pearleye P-030 LWIR User Manual
Page 47
Advanced parameters and commands
Pearleye Technical Manual V2.3.0
47
Usage of the parameters is described in more detail on the following pages.
2
Deactivated
Test mode: Correction data
A are output as image data. (*)
3
Deactivated
Test mode: Correction data
B are output as image data. (*)
4
One-point correction: Simple subtraction of the correction data
A from the input data. In addition the set value J is added as
offset to each pixel value.
5
One point correction: Simple subtraction of the correction data
B from the input data. In addition the set value K is added as
offset to each pixel value.
Note
(*) Operating modes 2 and 3 are for test purposes.
If you activate mode 2 or 3, the module does not transmit any
incoming image data. The module outputs correction data as
image data only.
Value
Description
Table 18: Parameter
E: values