Analog Way Eikos User Manual
Page 59
Advertising
The Frame/Logo can be memorized from
Output
#
1 or
#
2. To record a Frame/Logo, please refer to the chap-
ter “Capturing still Frame/Logo” in the Mixer mode (p.43).
To use a Frame/Logo, refer to “Working with Frame/Logo”.
As a source, each frame/logo can be used by both outputs, you just have to select the correct matrix# button
first.
Working with Frames/Logos
* NOTE *: Remember that to simplify the use of this feature, you need to manipulate the Output #1. While in
Mirror Mode, the Output #2 will follow the desired steps.
* NOTE *: Every change on the Output #2 will have an effect only on the Output #2, but remember that if a
change occurs on the Output #1 after that, the Output #2 will update automatically to match output 1
(in Mode 2/3/4).
57
Advertising