Analog Way Smart MatriX LE User Manual
Page 22
Overview
The
Smart MatriX LE rear panel is equipped with 8 universal digital and analog inputs. Inputs #1 through #4
(3) are universal analog inputs. Inputs #5 & #6 (4) share a DVI signal and a universal analog signal (plug the
included Analog Way DVI/HD15 adaptor cable to use DVI and analog signals simultaneously).
The Output #1 and #2 (6) will allow for the
Smart MatriX LE high resolution digital and analog signals to be
viewed on screen and/or on a Preview monitor (see also Output Specifications in this chapter).
The extra Video Out card installed on the
Smart MatriX LE, can be used for recording, broadcasting or
previewing purposes in a wide range of formats for maximum compatibility with industry viewing or recording
equipment.
Finally, the audio in and output card will let users mix audio with any source, accurately balance or tweak
sound sources and outputs.
1 : AC outlet and on/off switch
2 : IP-LAN connector
3 : Universal Computer/TV/HDTV inputs
4 : DVI inputs
5 : SD-HD/SDI inputs
6 : Analog & DVI outputs #1 & #2
7 : Audio inputs
8 : Audio outputs
9 : RS-232 connector
3-2. THE SMART MATRIX LE REAR PANEL
1
3
4
8
9
2
5
6
7
21