Datamax-O'Neil MF8I 270 User Guide - Manual (Page 13)

MF8i 270 PRINTER USER'S GUIDE
10
Audio Indicators
LED Description Action
Long series
of short
beeps Head jam. Check for paper jam.
1 short RF power is on (when
RF power button is
pressed and RF power
was off). None.
1 long Boot code is starting or
restarting (occurs more
than once when
downloading new
firmware). None.
2 short RF power is off (when
RF power button is
pressed and was on). None.
3 mid-
length Low battery voltage. Charge battery.
4 short Charge is starting when
external power is
applied to printer. None.
5 double Out of paper. Install paper.
8 CRC firmware error. Redownload firmware.
10 Error writing to
communication
controller firmware. Redownload firmware.
Infinite
beeps/
toggle LEDs Comm controller failure. Redownload firmware.
Note: Pressing Button 1 during a form feed or during
printing cancels the action.