Datamax-O'Neil H-Class HD Peel & Present Option - Manual (Page 5)

3
B) Carefully press the Peel and Present
Assembly into the Front Plate Connector.
C) Tighten the Mounting Screw to secure the
Peel and Present Assembly to the printer.
Front Plate
Connector
Mounting
Screw
Peel and Present
Assembly
Step 3: Using the Option
During operation, labels will be peeled from the backing material and dispensed “on-demand” – that is,
subsequent printing will occur only after a previously printed label has been removed from the printer. As a
reminder, “REMOVE LABEL” will be displayed to prompt you when a label awaits removal.
Begin using the option as follows:
A) Load Media (see the Operator’s Manual for
details). Extend 20 inches (50 cm) of Media
from the printer.
B) Remove the labels from this extended portion
of media, leaving only the Backing Material.
Crease the leading edge of this Backing
Material.
Backing
Material
Media
Supply
Hub