Datamax-O'Neil I-Class USB Interface Option - Manual (Page 5)

3
Setup and Configuration
To use the USB Interface, the printer requires an
Application Version (firmware) of 7.03 or greater.
Verify the current Application Version by printing
a Configuration Label (see sample).
If needed, update the Application Version by
downloading the necessary file from ftp.datamax-
oneil.com. Follow the procedure in the Operator’s
or Maintenance Manual for the printer.
 Note: The USB Interface is supported under Windows 95/98/2000/ME/XP and is not supported by
Windows NT. The examples below are from Windows 98; some of the following screens may
differ or not appear on other versions of Windows.
1. Obtain the Printer Driver Pack (R13 or greater) from the Accessories CD (version 6.0 or greater) or
download it from our FTP site at ftp.datamax-oneil.com.
2. After the file download has completed, run the
file by double clicking it. The screen to the
right will appear:
3. Click on the
Unzip button. It is recommended
that you do not alter the default ‘ Unzip To
Folder:’ location.
4. Connect a USB cable (not supplied) between
the PC and the printer.
USB Interface Card
Connector
USB Cable
WARNING
The USB Port is a device-end only connection. Never connect a keyboard, mouse,
modem, etc. into this port. Damage can result.