Datamax-O'Neil PrintPAD AN-14 (Line Printer and Easy Print Modes) - Manual (Page 5)

U Paper Out Beep
0 = 1 beep
Not 0 = 5 beeps
1 – one time
2 – rep every 15s
3 – rep every 30s
4 – rep every 60s
X
TP Test Print
0 = Normal
Not 0 = Special
ESC {CL?} LABEL CONFIGURATION QUERY
PARAMETER MEANING VALUES/FORMAT
ORIGINAL
MF2/MF3/2t/4t
RADIO READY
2t/3l/4t
T Type of stock used
P = Plain Paper
T = Top QMARK
B = Bottom QMARK
G = Inter-label Gap
X
D
Distance to advance after QMARK is
sensed before stop
Distance given in
dotlines (.005
inches)
X
M
Maximum distance to advance if
QMARK not sensed
Distance given in
dotlines (.005
inches)
X
S Sensor to use for Paper Out
T = Top Sensor
B = Bottom Sensor
LP3 only
P Presenter
Y = Yes (use)
N = No (do not use)
LP3 only
U Label Under Presenter Timeout
Time in seconds to
NOT go to sleep if
label is left under
presenter sensor
LP3 only
B Back-up distance
Distance given in
dotlines (.005
inches)
X
W
Windows Driver QMARK
(automatically advance to find
QMARK after print job from
Windows Driver) Y = Yes (assume
stock is QMARKED)
N = No (assume
stock is plain paper)
X