Datamax-O'Neil M-Class Mark II RFID Option - Manual (Page 4)

2
Start with the Right Media
Use RFID media that meets the specifications required by the encoder type:
Smart Label and Tag Requirements
[1]
HF Media Layout
[2]
UHF Media Layout
C
D
E
B
A
Forward
Movement
C
D
E
B
A
Forward
Movement
Definitions
[3]
Designator Description
Dimension
Inches Millimeters
A Label Width 4.00 101.6
B Label Lengths 2.00 50.8
C Chip Location Tolerance ± 0.05 ± 1.3
D Label Pitch (minimum) 1.75 44.4
E Chip Inlay Location 1.1 27.9
[1]
See the Operator’s Manual for additional standard media requirements.
[2] The HF RFID Chip Inlay Location can be left, right, or center justified.
[3]
Definitions referenced by looking down onto the labeling side of the media, and from the leading edge of the label (or
tag) as it moves forward through the printer.

Note: If you have questions selection, contact a Media Representative at (407) 523-5650.